Automatic Transfer Switch (ATS)
100A, 160A, 250A, 400A, 630A, 800A, 1000A, 1250A, 1600A, 2000A, 2500A, 3200A
Automatic Transfer Switch (ATS) is a vital electrical device engineered to seamlessly switch between two power sources (main/backup), ensuring an uninterrupted power supply to critical loads. This prevents production interruptions, data loss, and costly equipment damage due to power failures.
- Core Functions
Automatic Switching - In the event of main power supply disruptions (e.g., outages, undervoltage, overvoltage), it dynamically switches to an alternative power source (such as a generator, UPS, or secondary mains power).
Manual Priority Mode - Facilitates manual forced switching, streamlining maintenance or emergency operations effortlessly.
Zero Second Switching (Optional) - Certain models boast seamless transitioning, catering to environments demanding supreme power continuity, such as data centers and medical equipment.
Efficiently safeguard electrical safety and guarantee critical areas remain powered at all times!
Intelligent Monitoring: Enables real-time detection of voltage and frequency, automatically initiating switching upon identifying abnormalities.
High Reliability: Built with industrial-grade precision, designed to handle frequent operations, boasting a lifespan exceeding 10,000 cycles.
Safety Protection: Comprehensive overload and short circuit protection, with an IP protection level crafted for the most demanding environments.
Flexible Control: Offers the versatility of automatic/manual modes
Main technology parameters:
Connecting Terminal: Robust and reliable, this essential component ensures seamless integration and optimal performance of your power systems. (Circuit Board Aging Test for 48 Hours: Ensuring durability and reliability, our circuit boards undergo rigorous 48-hour aging tests to guarantee exceptional performance.
Fire Alarm Function of ATS: An indispensable feature for safety, designed to maintain uninterrupted power to critical fire equipment when it matters the most.
In the high-stakes environment of a fire power supply system, our dual power automatic transfer switch (ATS) excels by not only facilitating seamless automatic transitions between primary and backup power sources, but also incorporating an advanced fire alarm linkage. This ensures that essential fire equipment-such as smoke exhaust fans, fire pumps, and emergency lighting-remains operational. The system continuously delivers real-time feedback to the fire control center, enhancing safety and reliability.
Forced Switching: A vital safety measure ensuring that even when main power is restored, backup power remains active until a manual reset is initiated, averting unexpected outages during critical fire-fighting operations. - Even if the main power supply is restored, the backup power supply must still be maintained until manually reset (to prevent accidental power outages during fire extinguishing).
High Reliability: Equipped with a mechanical/electronic dual interlock system, our ATS prevents the perilous short circuits that can occur from the simultaneous connection of two power sources, guaranteeing operational security. - Mechanical/electronic dual interlock to avoid short circuits caused by parallel connection of two power sources.
Fast Response: Engineered for situations where every second counts, our ATS boasts a rapid switching time of ≤ 1 second, with a remarkable capability of ≤ 0.2 seconds for specified critical loads. - Switching time ≤ 1 second (some critical loads require ≤ 0.2 seconds).
Fire Signal Linkage: This proactive feature receives directives from the fire control center and securely locks the backup power supply, ensuring steadfast reliability during emergencies. - Receives signals from the fire control center and forcibly locks the backup power supply.
Switch Structure Explanation: A comprehensive overview of the meticulously designed components of our ATS switch, each playing a crucial role in its operation and safety.
1. Electric Key Lock::An innovative control mechanism for the switch's internal power supply line. When the electric key lock is opened, the switch can be operated both automatically and remotely. Conversely, when closed, manual operation is facilitated via a handle, ensuring secure and controlled use.
2. Operating Handle:For manual operation of the switch, the electric lock must be securely closed, allowing only handle-based control for enhanced safety.
3. Mechanic Padlock:During inspection, secure the switch in the '0' position using the operating handle, then engage the padlock mechanism. This action cuts off the internal power supply of the switch, rendering it inoperative electrically and manually, thus ensuring absolute safety during maintenance.
4. Position Indication:A clear and intuitive visual indicator of the switch's operational status, displaying positions I, 0, and II for straightforward and reliable monitoring.
Installation Instructions
Step-by-Step Guide to Installing the Dual Power Automatic Transfer Switch (ATS):
Optimal Installation Location: Ensure your ATS is installed in a dry and well-ventilated environment. Select a spot that is conveniently accessible to both the main and backup power supply inlets, facilitating effortless operation and seamless maintenance.
Critical Wiring Specifications: Connect both the main and backup power supplies to the ATS input terminals with precision. Ensure the output terminal is efficiently linked to the load, meticulously maintaining the correct phase sequence (L1/L2/L3/N/PE) for optimal performance.
Conducting a Seamless Switching Test: Initiate a simulation of a main power outage after powering on. Verify that the ATS efficiently performs the automatic switch-over within the expected time frame (typically ≤ 1.5 seconds) to guarantee uninterrupted power supply to the load.
Adhering to Essential Safety Requirements: Ensure reliable grounding at all times. Verify that the shell protection level is aptly suited for the installation environment, such as IP40 for indoor settings, and strictly complies with the GB/T 14048.11 standard.
-Inner Packaging Tailored for Maximum Protection
Utilizing Shockproof Materials Strategically
Material Selection: High-grade foam and protective bubble film, among others, to cushion and safeguard the contents.
Placement Strategy: Evenly distributed around the circuit breaker, covering both the top and bottom to ensure complete protection.
-External Packaging: Sturdy and Resilient
Packaging Type: Durable Carton
Material Excellence: High-strength, corrugated cardboard box designed to withstand transport stresses.
Carton Sealing for Ultimate Security
Sealing Method: Fasten with high-quality tape or secure strapping
to ensure a robust closure, preventing any risk of box cracking during transit.
Identification and Labeling: Precision and Clarity
Label Content Must Include:Detailed product model, quantity, weight, manufacturer, and transportation labels (such as fragile, this side up, moisture-proof, etc.), ensuring compliance with handling instructions.
Location Specification: Labels are prominently printed on the outer surface of the cardboard box for easy identification.
Domestic Transportation: Efficient and Timely
Collaborating with designated freight forwarders in China to transport products promptly to specified destinations using road transportation or domestic express services, ensuring swift delivery post-production completion.
International Transport: Speed Meets Precision
For small quantities requiring urgent delivery to international destinations, we partner with leading global express services like
DHL, FEDEX, UPS
to guarantee reliable delivery.
Sea Freight/Air Freight: Optimizing for Volume and Cost-efficiency For large shipments with flexible timelines, we engage areputable freight company to arrange truck pickups, ensuring seamless transport to ports forwarehousing . Goods are then expertly shipped by sea to the customer's specified port, requiring a bill of lading for collection.
Mingtuo Electric Mingtuo Electric not only holds an esteemed position in the domestic market but is also ambitiously expanding into the international arena. Our products are extensively utilized across sectors such as construction, industry, and energy, earning the trust and preference of numerous high-profile engineering projects.
The company adheres to the unwavering principle ofcustomer first, quality first, service first, reputation first,and persistently pursues the visionary concept of innovation and development. The company is distinguished by its strong technical prowess, cutting-edge production technology, and extensive experience in research and development, renowned for its professionalism and leadership in technological advancements. We boast a comprehensive suite of the most advanced production, testing, and inspection equipment available in China.
FAQ
Q: What is the product voltage/current range? What's the breaking ability?
A: For detailed specifications, please get in touch with our customer service team.
Q: What is the MOQ? Do you support sample ordering?
A: The minimum order quantity is 1 set, and we happily support sample orders.
Q: How long is the warranty period? How to apply for warranty?
A: Our products come with a warranty period ranging from one to two years. You can apply for warranty directly through our customer service.
Q: Do you have CE, RoHS, UL and other certifications? Can you provide a certificate?
A: Yes, we hold CE and RoHS certifications and are pleased to provide these certificates upon request.
Q: Does the price include tax/shipping?
A: Prices are listed exclusive of shipping and tax.
Q: What famous clients or project cases have you worked with?
A: We have collaborated with prestigious clients such as the State Grid of China, Chint Group, and Xiaomi Group.
Audited Supplier 
){kind=link}